Mould Lubrication Oil
Penetrating Oil A very strong cleaner, which can be used to soften up / remove baked on drying oils and Hard coke asphaltic deposition etc. It is low toxic product with an exceptional solvency power on soil & oily matter . It is minimizes the extre
Application & Uses
Areas of Application
- Industrial mould lubrication.
- Concrete moulds and formwork applications, subject to substrate compatibility.
- Precast concrete moulds.
- Cement product manufacturing.
- Industrial casting and moulding operations.
- Mould surfaces requiring lubrication and release assistance
Dosage & Directions for Use
How to use Mould Lubrication Oil?
Step 1 - Surface Preparation
- Ensure the mould surface is clean and free from concrete deposits, dust, rust and other contaminants.
- Remove any residual hardened material before applying the lubricant.
Step 2 - Application
- Apply RXSOL Mould Lubrication Oil directly onto the mould surface using a spray gun, brush, roller or clean cloth.
- Spread evenly to form a thin, continuous lubricating film.
- Avoid excessive application and accumulation of oil in corners or depressions.
Step 3 - Moulding Operation
- Allow the applied film to distribute uniformly over the mould surface.
- Proceed with the moulding or casting operation as per the production process.
- Ensure that excess oil is removed before introducing the moulding material.
Step 4 - Maintenance
- Clean the mould after each production cycle, where necessary.
- Reapply the lubricant before the next moulding operation.
Technical Specifications & Properties
|
Parameter |
Specification |
Test Method |
|---|---|---|
|
Appearance |
Clear, homogeneous liquid |
Visual |
|
Colour |
Pale yellow to amber |
Visual |
|
Odour |
Mild petroleum odour |
Organoleptic |
|
Density @ 15°C |
0.850-0.890 g/cm³ |
ASTM D4052 |
|
Specific Gravity @ 15°C |
0.850-0.890 |
ASTM D4052 |
|
Solubility in Water |
Insoluble |
Visual |
|
Corrosive Properties |
Non-corrosive under normal application conditions |
ASTM D130 |
Product Description & Chemical Profile
RXSOL Mould Lubrication Oil is a specially formulated industrial lubricant designed to provide effective lubrication between mould surfaces and the material being processed. It forms a thin, uniform lubricating film that helps minimize friction, sticking and material adhesion during moulding operations.
The product facilitates smooth mould release, reduces surface defects and helps maintain the cleanliness of mould surfaces. Its lubricating properties help reduce wear caused by repeated moulding cycles and contribute to improved operational efficiency.
It is suitable for industrial moulding applications where controlled lubrication and easy release of finished products are required.
Need pricing, bulk volume, or vessel delivery today?
Send us your required quantity, delivery location, or vessel IMO number. Our technical marine supply team replies within 1 hour.